Rust-Oleum 248953 Engine Enamel Spray Paint 12 Oz, Cast Coat Aluminum

Rust-Oleum Engine Enamel creates a smooth finish and is formulated for use on automotive engines and other automotive surfaces which reach intermittent temperatures up to 500°F (260°C).

Highlights:

• Engine Enamel
• Color: Cast Coat Aluminum
• Size: 12 Ounce
• Any-Angle Spray with Comfort Tip.
• Creates a smooth finish and is formulated for use on automotive engines and other automotive surfaces.
• Resists heat up to 500 degrees fahrenheit, gas and oil resistant, stops rust formula, can be sprayed at any angle with comfort tip.

Application:

Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy, dusty conditions. Cover the surrounding area to protect from spray mist. Hold the can 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart.

Physical Properties:

• Resin Type: Modified alkyd
• Solvent Type: Ketone/aromatic
• VOC (Volatile Organic Compounds): NA
• Weight Per Gallon: NA
• Weight Per Liter: NA
• Solids By Weight: 13.7 – 27.4%
• Solids By Volume: NA
• Recommended Dry Film Thickness Per Coat: 1.0 mil
• Wet Film To Achieve Dft: 3.0 mils
• Practical Coverage @ Recommended Dft: 10 – 15 square feet
• Dry Times @70° - 80°F (21° - 27° C) And 50% RH: 15 minutes tack-free
• Shelf Life: 5 years